Nov 18, 2026

What are the functions of transformers in electric equipment?

Leave a message

If you’re in the electric equipment space, you’ve probably heard the word “transformer” thrown around a ton—mostly as a part of big power grids or industrial machinery, but you might not stop to think about how integral these unassuming devices are to the tools you rely on every single day. As an electric equipment supplier, I’ve spent years walking customers through every component of the gear we carry, and transformers are never the “afterthought” some folks write them off as. Let’s break down what transformers actually do in our equipment, why they matter, and how they keep everything running smoothly (no random breakdowns, no last-minute shutdowns on job sites).

2S35 Max-Electric Skid Steer Loader

First off, let’s get the basics out of the way for anyone who’s a little fuzzy on electrical 101: transformers are all about voltage, but not in the way your phone charger bumps up power for your device. They work with alternating current (AC, which is what most of our electric gear uses) to step voltage up or down without changing the total power (minus tiny, negligible losses). Most construction and industrial electric equipment runs on specific voltage ranges—too high, and you’ll fry wiring or delicate parts; too low, and the machine won’t have enough oomph to do the job. That’s where transformers come in, acting like the middleman that makes every piece of our equipment compatible with both the grid and its own internal systems.

Let’s start with the most obvious function, and the one I talk about the most with our construction equipment customers: voltage matching for power delivery. Take, for example, the electric demolition robot we supply, the Yuchai D170 Electric Remote-Controlled Demolition Robot. Job sites for demolition are messy, but they still need consistent power—whether you’re plugging into a temporary grid hookup or a portable generator. The D170 is built to run on 480V AC for its heavy-duty hydraulics and motor, but a lot of temporary site power is 208V. Plugging that 208V straight into the robot would mean it only delivers half its torque, which is useless when you’re breaking down concrete or steel. The built-in transformer adjusts that 208V to exactly the 480V the robot needs, so the remote control system works, the cutting arm has enough force, and the whole unit runs without overheating. I’ve had a couple of customers test this: they tried skipping the transformer once to save a step, and the robot bogged down mid-demolition, costing them hours of time. Transformers aren’t just “good to have” here—they make the equipment usable at all.

Next, a function that’s easy to miss but super important for extending equipment life: electrical isolation. A lot of folks don’t realize that the power coming into any machine has “noise” — tiny, random voltage spikes and drops from the grid, or even from other tools running on the same line. For sensitive parts like motor controllers, battery management systems, or the little sensors that track machine temperature, that noise is a problem. It can cause glitches, throw off sensor readings, or even wear out parts faster. Transformers use two separate coils of wire (the primary and secondary) wrapped around an iron core, so there’s no direct electrical connection between the incoming power and the machine’s internal circuits. That isolation acts like a filter, cleaning up that noise.

Take our S35-Electric Skid Steer Loader as an example. S35-Electric Skid Steer Loader is used for everything from moving pallets around a warehouse to grading a backyard, and its electronic control system (which handles smooth steering, bucket positioning, and even attachment compatibility) relies on super precise voltage. A spike from the grid might make the steering jerk unexpectedly, which is not just annoying—it’s a safety hazard. The built-in isolation transformer keeps that spike from getting to the control board. I’ve had customers run the S35 on the same line as a forklift and a compressor, and without that transformer, the skid steer’s joystick would drift; with it, it’s as smooth as butter. That same principle applies to our bigger models too, like the YC Z25 Electric Wheel Loaders, which have massive hydraulic systems and battery packs that need clean power to last as long as they should.

Speaking of batteries—transformers play a big role in charging, too, which is a huge part of our all-electric equipment line. A lot of people think electric equipment charges just like a phone, plug and go, but charging high-voltage batteries safely needs controlled current and voltage. That’s where a charging transformer comes in. When you plug the S150-Electric Skid Steer Loader into a Level 2 charger or a fast-charging station, the transformer steps down the grid’s high voltage (like 480V for fast charge) to the lower voltage the battery can handle, while also regulating the flow so you don’t overcharge or overheat the battery. That’s not just about charging fast—it’s about keeping the battery healthy. We’ve had customers who tried using a generic charger without a transformer for the S150, and their battery’s cycle life dropped by almost 30% in six months. The transformer makes sure the charge is gentle but efficient, so you get thousands of hours out of your battery before needing a replacement. That’s a big cost saver for anyone running equipment daily.

Another function that’s come up a lot lately with energy efficiency: power factor correction. Wait, what’s power factor? Basically, it’s a measure of how effectively a machine uses the electricity it draws. A low power factor means the equipment is wasting energy on reactive power—power that doesn’t actually do work, like heating up wiring instead of turning a motor or moving a bucket. Transformers (especially the ones designed for industrial electric equipment) help adjust power factor so the machine uses every bit of the electricity it pulls. That not only cuts down on your energy bill—your utility company might even charge you extra if your power factor is too low, which is a real thing I had no clue about until a customer told me.

Our Max line, like the S35 Max-Electric Skid Steer Loader, is built for heavy-duty, all-day use on job sites, so power factor is a big deal there. The transformer in the S35 Max adjusts the power factor to almost 0.95 (that’s a really good number for heavy equipment), so you’re not paying for electricity you’re not using. A customer in Texas recently ran the numbers: with the old skid steer they had (which didn’t have a built-in power factor correction transformer), their monthly energy bill for the unit was around $280; with the S35 Max, it dropped to under $190. That’s almost $1,000 a year in savings—no small chunk of change for a small construction business.

Let’s talk about safety, too—because at the end of the day, equipment on a job site needs to keep operators and bystanders safe. Transformers add a layer of protection against electrical faults. If something goes wrong inside the equipment—like a wire fraying and touching the frame, which is metal and grounded to the ground—the transformer limits the amount of current that can flow. That means instead of a massive short circuit that could cause a fire or shock someone, the current is low enough that the equipment’s fuse or breaker will trip safely, stopping the problem before it gets bad. I’ve seen a couple of cases where a wire in the YC Z25’s hydraulic system came loose, and the transformer prevented a spark that could’ve ignited fuel fumes or nearby debris. It’s not the flashiest part, but it’s the one that stops accidents before they happen.

Now, you might be thinking: “Wait, if transformers do all that, why don’t I hear about them more?” Part of it is because they’re designed to be reliable—most of the time, you don’t notice they’re working, which is exactly how they should be. If a motor is running smooth, the battery is charging, the joystick isn’t drifting, you don’t stop to go “oh, that’s the transformer doing its job.” But when they fail? You notice immediately. A few years back, we had a customer whose S150 had a faulty transformer, and they were down for three days waiting for a replacement. That cost them a whole week of site work, which is a big deal when you’re on a deadline.

As an electric equipment supplier, we don’t just sell machines—we sell peace of mind. That’s why every unit we carry, from the S150-Electric Skid Steer Loader to the Yuchai D170, is built with high-quality transformers that are sized specifically for the equipment’s needs, not a one-size-fits-all part. We don’t cut corners here because we know how much operators rely on these machines. If you’re shopping around for electric equipment, don’t just look at the horsepower or battery life—ask about the transformer. It’s the unsung hero that keeps all the other parts working.

Now, if you’re ready to upgrade your equipment line or replace your old gas-powered gear with reliable all-electric units, we’re here to help. We’ve got all the models I mentioned, plus plenty of other electric construction and industrial equipment, and our team can walk you through exactly which setup works for your job sites, power needs, and budget. We don’t do generic, and we don’t push stuff that doesn’t fit—just solid gear with the kind of components that make long days run smoothly. Reach out to our team to chat through your needs, and we can get you set up with the right equipment and support to keep your business moving without the headaches.

References

  1. Electric Power Research Institute. (2022). Transformer Applications in Industrial Electric Equipment. EPRI Press.
  2. Construction Equipment Association. (2023). Safety and Efficiency Features of All-Electric Construction Machinery. CEA Publications.
  3. International Electrotechnical Commission. (2021). Standards for Isolation and Power Factor Correction in Low-Voltage Industrial Transformers. IEC Standards 61558.
  4. National Fluid Power Association. (2022). Power Delivery for Electric Construction Hydraulics. NFPA Technical Report.
Send Inquiry