YCG-200N5LC
Rated power：200kW
Gas source: natural gas(CH4≥85%)
Voltage/frequency：400V/50Hz
Product introduction
High Reliability
Based on the design and production platform of mature products, Yuchai independently developed and manufactured high-temperature wear-resistant materials suitable for gas generator sets, as well as high-strength main components such as cylinder blocks, cylinder heads, camshafts, crankshafts, and common bases, greatly improving the reliability and durability of the products.
01
High Efficiency and Environmental Friendliness
By adopting mature technologies such as lean combustion, Yuchai patented combustion chamber, and oxygen sensor closed-loop control, we ensure efficient and clean combustion of gas, precise control of air-fuel ratio, low emissions, and improved performance consistency and stability, which is friendly to operators and the natural environment.
02
Low Maintenance Costs
By adopting Yuchai's patented cylinder liner, piston ring, and valve sealing technology, the consumption rate of lubricating oil is significantly reduced. Gas generator sets are equipped with universal and easy to maintain components, significantly reducing maintenance costs for power generation equipment.
03
Safety Protection
Adopting an independent and mature unit control system, the control system is stable and monitors the overall status in real-time to ensure the safety of the entire machine.
04
Alternator
The generator has the advantages of high power generation efficiency, low temperature rise, low waveform distortion rate, good dynamic performance, and stable AVR parallel operation. It has first-class reliability and durability, and can meet the requirements of various harsh environments.
05
Standard configuration range
|
NO. |
Item name |
Unit |
Quantity |
NO. |
Item name |
Unit |
Quantity |
|
1 |
Gas engine | Tower |
1 |
7 |
Silencer, corrugated pipe | Set |
1 |
|
2 |
Generator | Tower |
1 |
8 |
Storage battery | Set |
1 |
|
3 |
Water tank radiator | Tower |
1 |
9 |
Shock absorber | Individual |
6 |
|
4 |
Common base | Tower |
1 |
10 |
Random tool |
Set |
1 |
| 5 | Local control cabinet | Tower | 1 | 11 | Random data | Set | 1 |
| 6 | Valve group | Set | 1 | ||||
| Random materials include: user manual, external installation diagram, technical parameter table, motor manual, electrical cabinet instructions, wiring schematic, and three guarantee service manual. | |||||||
Control function
|
Basic function |
Power switch, start, stop, emergency stop, on/off control, etc. |
|
Display function |
Phase voltage, line voltage, current, frequency, phase sequence, active power, reactive power, apparent power, power factor, cumulative generated electricity, speed, oil pressure, cooling water temperature, unit operating time, cumulative startup times, battery voltage, etc. |
|
Protection function |
Overspeed, underspeed, overvoltage, undervoltage, over frequency, under frequency, overcurrent, over power, low oil pressure, high water temperature, low battery voltage, charging failure, etc. |
Unit size&weight
| Unit net size & net weight | Long/A | Width/B | High/C | Weight |
|
3600mm |
1300mm |
1780mm |
3200kg |
Note: The above data and information will be updated with product upgrades, and Yuchai reserves the right to make technical changes.
Hot Tags: ycg-200n5lc open frame gas generator set, China ycg-200n5lc open frame gas generator set manufacturers, suppliers, factory, YC6KG 200N5LC Silent Gas Generator Set, YC6MJ Marine Main Engine, 800KW 60HZ 400V Open Frame Diesel Generator Set, 2400KW 50HZ 400V Silent Diesel Generator Set, Electronic Throttle, MV52 Engineering Machinery Engine
| Generator Set Parameters | |
| Model |
YCG-200N5LC |
| Rated power |
200kW/250kVA |
| Rated speed |
1500r/min
|
| Rated voltage |
400V |
| Rated current |
361A |
| Frequency |
50HZ |
| PF | 0.8(lagging) |
| Generator efficiency |
≥34.7% |
| Fuel consumption rate under full load |
63.3m³/h |
| Noise |
≤96dB(A)@1m |
| Starting method | Electric start |
| Weight |
3200kg |
| Engine Parameters | |
| Model |
YC6K350N-D30 |
| Rated power |
235kW |
| Rated speed |
1500r/min |
| Cylinders |
6 |
| Type | In line, four stroke, water-cooled |
| Bore× stroke(mm) |
129mm×165mm |
| Displacement(L) |
12.94L |
| Compression ratio |
10.5:1 |
| Control system | ECU electronic control |
| Oil consumption rate |
≤0.2g/kWh |
| Coolant capacity (including radiator) |
72L |
| Oil capacity |
32L |
| Overhaul period |
40000h |
| Generator Parameters | |
| Model |
YC-200-4 |
| Connection | Three phase four wire system (Y-shaped) |
| Pressure regulation method |
AVR |
| Protection grade |
IP21
|
| Insulation level |
F
|
| Test Conditions | |
| Gas calorific value |
9.1kWh/m³ |
| Methane volume content |
≥95%
|
| Gas temperature |
-20~50℃
|
| Gas humidity |
＜60%
|
| Gas intake pressure |
10~30kPa
|
| Air intake negative pressure |
＞-3kPa
|
| Exhaust back pressure |
＜5kPa
|
| Absolute atmospheric pressure |
101.32kPa
|
| Environmental temperature |
25℃
|
| Relative humidity |
30%
|
| Altitude |
≤1000m
|
| Note: All data of the gas generator set were measured in the above testing environment. | |
