YC16VCG-2000N5HC
Rated power：2000 kW
Gas source: natural gas(CH4≥90%)
Voltage/frequency：10.5kV/50 Hz
Product introduction
High Reliability
Based on the mature product design and production platform, Yuchai has independently developed and manufactured high-temperature wear-resistant materials and high-strength components (including cylinder block, cylinder head, camshaft, crankshaft, and common base) suitable for gas genset, greatly improving the reliability and durability of the product.
01
High Efficiency and Environmental Friendliness
The application of such mature technologies as lean combustion, high-energy capacitor ignition module, Yuchai's patented combustion chamber, high efficiency turbocharger, and oxygen sensor closed-loop control ensures efficient and clean gas combustion, accurate air-gas ratio control, higher performance consistency and stability, and low emissions.
Yuchai's patented rear gear chamber and point-line meshing gear technology and the four-valve technology are applied to the gas engine, effectively reducing the mechanical noise, exhaust noise and exhaust temperature of the powertrain, and ensuring the friendliness to operators and the natural environment.
02
Low Maintenance Costs
Yuchai's patented cylinder liner, piston ring and valve seal technologies are applied, greatly reducing the consumption rate of lubricating oil, and extending the change cycle of lubricating oil to be more than 1,500 hours. The gas genset is equipped with parts with good universality and convenient maintenance, greatly reducing the maintenance cost of power generation equipment.
03
Safety Protection
The genset is equipped with an independent mature genset control system to realize stable control, a knock monitor for each cylinder to realize real-time condition monitoring of the genset, as well as crankcase and inlet pipe explosion-proof valves, ensuring the safety of the genset.
04
Alternator
The alternator has the advantages of high generating efficiency, low temperature rise, low waveform distortion rate, good dynamic performance and stable AVR parallel operation, as well as first-class reliability and durability, and can meet the service requirements of various harsh environments.
05
Standard range
|
NO. |
Part Name
|
Unit |
Quantity |
NO. |
Part Name
|
Unit |
Quantity |
|
1 |
Gas engine
|
Set
|
1 |
6 |
Genset control cabinet
|
Pcs.
|
1 |
|
2 |
Valve group
|
Set
|
1 |
7 |
Silencer, bellows
|
Set |
1 |
|
3 |
Alternator
|
Pcs.
|
1 |
8 |
Battery
|
Set
|
1 |
|
4 |
Common base
|
Pcs.
|
1 |
9 |
Accompanying tools
|
Set |
1 |
| 5 |
Flexible coupling
|
Pcs.
|
1 | 10 |
Accompanying documents
|
Set | 1 |
| 1. The radiator parts are optional. 2. The accompanying documents include operation manual, outline and installation drawing, list of technical parameters, motor specifications, electrical cabinet specifications, wiring diagram, and three guarantees service manual. |
|||||||
Control function
|
Basic function |
Power switch, startup, shutdown, emergency stop, and closing and opening control
|
|
Display function |
Phase voltage, line voltage, current, frequency, phase sequence, active power, reactive power, apparent power, power factor, cumulative energy output, speed, oil pressure, coolant temperature, exhaust temperature, genset operation time, cumulative startup times, and battery voltage
|
|
Protection function |
Overspeed protection, underspeed protection, overvoltage protection, undervoltage protection, overfrequency protection, underfrequency protection, overcurrent protection, overpower protection, low oil pressure protection, high water temperature protection, high exhaust temperature protection, low battery voltage protection, and charging failure protection |
Unit size&weight
| Net dimensions and weight of genset |
A
|
B
|
C
|
Weight
|
|
8834 mm
|
2055 mm
|
2890 mm
|
25500kg
|
Note: The above data and information will be updated with the upgrade of the product, and Yuchai reserves the right to make technical changes.
Hot Tags: yc16vcg-2000n5hc open frame gas generator set, China yc16vcg-2000n5hc open frame gas generator set manufacturers, suppliers, factory, YC6CG 500N5LC Silent Gas Generator Set, Clutch Cover And Pressure Plate, longhu lubricating oil, Electronic Throttle, YC6MKG 150N5LC Silent Gas Generator Set, Yuchai F35 IV Harvester Head
| Generator Set Parameters | |
| Model |
YC16VCG-2000N5HC
|
| Rated power |
2000kW /2500kVA
|
| Rated speed |
1500 r/min
|
| Rated voltage |
10.5kV
|
| Rated current |
137.5A
|
| Frequency |
50HZ |
| PF | 0.8(lagging) |
| Generator efficiency |
40%
|
| Fuel consumption rate under full load |
547.6m³/h
|
| Noise |
≤114dB(A)@1m
|
| Starting method |
electronic
|
| Weight |
25500kg
|
| Engine Parameters | |
| Model |
YC16VC3300N-D30
|
| Rated power |
2205kW
|
| Rated speed |
1500 r/min
|
|
Number of cylinders:
|
16 |
|
Form
|
V-type, four-stroke, water-cooling
|
| Bore× stroke(mm) |
200mm×210mm
|
|
Displacement
|
105.6L
|
| Compression ratio |
12.5:1
|
|
Control system
|
ECU
|
|
Oil consumption rate
|
≤0.5 g/kWh
|
|
Coolant capacity (excluding radiator)
|
260L
|
|
Oil capacity
|
460L
|
|
Overhaul interval
|
40000h
|
|
Alternator Parameters
|
|
|
Alternator model
|
YC-2000-4H
|
|
Wiring mode
|
three-phase three-wire system (Ytype)
|
|
Voltage regulation mode
|
AVR
|
|
IP grade
|
IP23
|
|
Insulation class
|
H
|
| Heat Balance Parameters | |
|
Coolant heat of cylinder liner (±8%)
|
720kW
|
|
Coolant heat of oil cooler (±8%)
|
350kW
|
|
Coolant heat in the primary stage of intercooler (±8%)
|
369kW
|
|
Total coolant heat of high-temperature cooling system(±8%)
|
1439kW
|
| Coolant heat the secondary stage of intercooler(±8%) |
162kW
|
|
Total coolant heat of low-temperature cooling system(±8%)
|
162kW
|
|
Waste heat of exhaust gas (with the exhaust gas temperature up to 120°C) (±8%)
|
1106kW
|
|
Total radiant heat (±8%)
|
159kW
|
| Cooling Parameters | |
|
Flow rate of high-temperature circulating water
|
120 m³/h
|
| Inlet temperature of high-temperature circulating water (±2%) |
75.7℃
|
| Outlet temperature of high-temperature circulating water (±2%) |
86℃
|
|
Flow rate of low-temperature circulating water
|
96m³/h
|
|
Low-temperature inlet water temperature (±2%)
|
40℃
|
|
Low-temperature outlet water temperature (±2%)
|
41.5℃
|
|
Intake and Exhaust Parameters
|
|
|
Air intake
|
10157.0 kg/h
|
|
Gas intake
|
376.7 kg/h
|
|
Air displacement
|
10533.7 kg/h
|
|
Exhaust temperature after turbocharger (±5%)
|
480°C
|
| Test Conditions | |
|
Calorific value of gas
|
9.13 kWh/m³
|
|
Volume content of methane
|
≥95%
|
|
Gas temperature
|
10~40°C
|
|
Gas humidity
|
＜60%
|
|
Gas intake pressure
|
15~30 kPa
|
|
Air intake negative pressure
|
＞-3kPa
|
|
Exhaust back pressure
|
＜5kPa
|
|
Absolute atmospheric pressure
|
101.32kPa
|
|
Ambient temperature
|
25℃
|
|
Relative humidity
|
≤30%
|
| Altitude |
≤1000m
|
|
Note: All data of the gas genset are measured in the above test environment.
|
|
